DM & DX Series Rice Milling Bucket
-
DM is Special for Rice machine. The unloading method is distinct. The materials on the upper bucket will slip off from the bottom of this bucket then enter the elevator discharging port. The unloading process is smooth. So that can reduce the fragmentation of materials when lifting. Suitable for low-speed gravitational discharge.
-
DM series recommended installation spacing is height "C" dimension + 5 mm; The linear speed of the elevator is 0.5-0.8 m/s;
-
DX is a new type different from DM type. It retains groove on the back wall, but have more internal volume than DM. It is widely used in the promotion of finished feed which requires high crushing prevention. It belongs to slow gravity unloading.
-
DX series recommended installation spacing is winnowing pan back height "C" dimension + 15 mm; The linear speed of the elevator is 0.5-1 .5 m/s;
-
Both series recommend "Volume (L)" as the available volume for engineering design.
